Home Products General SiC SBD SEDH008G065C3
SEDH008G065C3
SEDH008G065C3

SEDH008G065C3

Product Attributes :

650V Schottky Rectifier

Zero Reverse Recovery Current

High-Frequency Operation

Temperature-Independent Switching Behavior

Extremely Fast Switching

Benefits:

Replace Bipolar with Unipolar Rectifiers

Essentially No Switching Losses

Higher Efficiency

Reduction of Heat Sink Requirements

Parallel Devices Without Thermal Runaway

Product Description

Maximum ratings (TC=25°C unless otherwise specified)

Parameter Symbol Test Conditions Value Unit Note
Repetitive Peak Reverse Voltage VRRM   650 V  
DC Peak Reverse Voltage VR   650 V  
Continuous Forward Current IF TC=25˚C 29 A Fig.3
TC=135˚C 14
Tc=155˚C 8
Repetitive Peak Forward Surge Current IFRM TC=25˚C, tP=10 ms, Half Sine Pulse 44 A  
TC=110˚C, tP=10 ms, Half Sine Pulse 36  
Non-Repetitive Forward Surge Current IFSM TC=25˚C, tP=10 ms, Half Sine Pulse 56 A  
TC=110˚C, tP=10 ms, Half Sine Pulse 49  
Non-Repetitive Forward Surge Current IF,MAX TC=25˚C, tP=10μs, Square Wave Pulse 500 A  
TC=110˚C, tP=10μs, Square Wave Pulse 469  
i²t value ∫i²dt TC=25˚C, tP=10 ms 16 A²s  
TC=110˚C, tP=10 ms 12  
Power Dissipation Ptot TC=25˚C 100 W Fig.4
TC=110˚C 43
Operating Temperature TJ   -55 to ˚C  
+175
Storage Temperature Tstg   -55 to ˚C  
+175
TO-220 Mounting Torque   M3 Screw 0.7 Nm  
6-32 Screw 6.2 Ibf-in

 

Electrical Characteristics(TJ=25℃)

Parameter Symbol Test Conditions Value Unit Note
Min. Typ. Max.
Forward Voltage VF IF=8A, TJ=25°C   1.4   V Fig.1
IF=8A, TJ=175°C   1.6  
Reverse Current   IR VR=650V, TJ=25°C   1   μA Fig.2
VR=650V, TJ=175°C   9  
Total Capacitive Charge    QC VR=400V, TJ=25°C   37   nC Fig.5
Total Capacitance   C VR=0V,TJ=25°C,f=1MHz   554   pF Fig.6
VR=200V,TJ=25°C,f=1MHz   47  
VR=400V,TJ=25°C,f=1MHz   46  
Capacitance Stored Energy    EC VR=400 V   7   μJ Fig.7

 

Thermal Characteristics

Parameter Symbol Value Unit Note
Thermal Resistance(Junction to Case) RɵJC 1.5 °C/W Fig. 8

 

Typical Performance

 

Package Dimensions

 

Attention

    Specifications of any and all products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment.

    We assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all Silicon products described or contained herein.

    Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc.

 

 
Online Inquire